Autel IA700AS MaxiSYS All-Systems ADAS Calibration Frame with Alignment Pre-Check (Tablet Not Included)

Description

The Autel IA700AS is a modular MaxiSYS ADAS calibration frame built for shops that need to calibrate camera, radar, lidar, and night vision systems on the vehicles coming through the bay today. A robotic crossbar with six high-resolution positioning and tracking cameras handles target alignment optically — the frame finds the vehicle, prompts unlevel-floor compensation, and positions the targets. The package ships with the calibration targets, patterns, tire clamps with camera plates, alignment aid, steering wheel lock, brake chocks, power supply, frame cover, and target case needed to start working through static and dynamic calibrations.

The IA700AS package is the frame-only configuration — it requires a separate Autel MaxiSYS 909, MS919, or MS Ultra tablet and an ADAS calibration software upgrade card to drive the calibration coverage. Shops that already own a compatible MaxiSYS tablet save by buying the frame on its own; shops that need the tablet bundled should look at the IA700AST instead.

Features

Robotic crossbar with six-camera optical positioning

The crossbar carries six high-definition positioning and tracking cameras that locate the vehicle, position the targets, and prompt the operator when the floor is not level. Optical positioning replaces the manual measure-and-laser routine on every calibration.

All-Systems ADAS coverage

Targets, patterns, and calibration components included in the package support camera, radar, lidar, and night vision calibrations on equipped vehicles — including radar-based front and rear-collision warning systems, around-view monitoring, lidar, and night vision systems.

Lane Departure Warning targets for 13 OEMs

Includes LDW calibration targets and patterns for camera-equipped Mercedes-Benz, Nissan, Infiniti, Hyundai, Kia, Toyota, Lexus, Mazda, Mitsubishi, Subaru, Volkswagen, Audi, and Alfa Romeo vehicles. Targets ship in a dedicated case.

Disassembles for transport and storage

The frame breaks down into modular components — column, side rails, robotic crossbar head, base, and cover — for transport between bays or compact storage when not in use.

Compatibility

The IA700AS requires one of the following Autel MaxiSYS tablets, plus an ADAS calibration software upgrade card, to run static and dynamic ADAS calibration coverage for most U.S., Asian, and European ADAS-equipped vehicles:

• Autel MaxiSYS 909
• Autel MaxiSYS MS919
• Autel MaxiSYS Ultra

If you need the frame bundled with the MaxiSYS MS909 S2 tablet from MGS rather than sourcing it separately, see the Autel IA700AST package with MS909 S2 tablet.

What’s Included

• IA700 modular frame with robotic crossbar
• Six high-resolution positioning and tracking cameras on the crossbar
• All-Systems ADAS calibration targets and patterns
• Lane Departure Warning targets and patterns (Mercedes-Benz, Nissan, Infiniti, Hyundai, Kia, Toyota, Lexus, Mazda, Mitsubishi, Subaru, Volkswagen, Audi, Alfa Romeo)
• Target case
• Four tire clamps with camera targets
• Steering wheel lock
• Brake chocks
• Power supply
• Alignment aid
• Frame cover

MaxiSYS tablet and ADAS calibration software upgrade card are not included — sold separately.

Specifications

Warranty

The MaxiSYS IA700AS package is covered by a 1-year Limited Warranty.

FAQ

Is a MaxiSYS tablet included in the IA700AS?

No. The IA700AS is the frame-only configuration. A compatible Autel MaxiSYS 909, MS919, or MS Ultra tablet — plus an ADAS calibration software upgrade card — is required and sold separately.

Which ADAS systems can the IA700AS calibrate?

Camera, radar, lidar, and night vision systems on equipped vehicles, including radar-based front- and rear-collision warning systems and around-view monitoring systems.

Does the package include Lane Departure Warning targets?

Yes. LDW calibration targets and patterns are included for camera-equipped Mercedes-Benz, Nissan, Infiniti, Hyundai, Kia, Toyota, Lexus, Mazda, Mitsubishi, Subaru, Volkswagen, Audi, and Alfa Romeo vehicles. Targets ship in a dedicated target case.

How does the robotic crossbar position the targets?

Six high-resolution positioning and tracking cameras on the crossbar locate the vehicle and target frames optically, and prompt the operator when the floor is not level so the calibration is performed against a corrected reference.

Can the frame be moved between bays or stored compactly?

Yes. The frame disassembles into modular components — column, side rails, crossbar head, base, and cover — for transport or space-saving storage when the bay is needed for other work.

Documents

Manual and technical documents available on request — contact sales@mygaragesupplies.com or call 307-381-1810.